Lambda Advanced Technology - High Pressure Reactors

Home >> Products >> High Pressure Reactors


	UV Visible Spectrophotomers Fluorescence Spectrophotometers Atomic Absorption Spectrometers Sample Dissolution Microwave Digestion High Pressure Reactors Acid Purification Electron Microscopes Nanodroplet Biospectrophotometry Cells
	Service Contracts Calibration & Certification IQ OQ Lease, Rental & Ex-Demo
	BROCHURES ACCESSORIES CONSUMABLES TRAINING

BR HIGH PRESSURE REACTORS

HR HIGH PRESSURE REACTORS

BR HIGH PRESSURE REACTORS
o
	>> brochure		High Pressure Reactor BR-25 - the "Little One" The high pressure reactor is available in Stainless Steel SS 316Tl, Hastelloy C-4, or Stainless Steel SS 316Tl with a PTFE insert and with no lid liner. The useable reactor volume can be varied by the employment of different reactor vessels ranging from 25 ml to 40 ml. Smaller volumes are available on request. To close the reactor, the vessel is simply screwed into the lid by hand. The reactor is sealed by means of a conical flange lock and an O-ring made of PTFE, Viton®, or Kalrez®. The matching fittings sets are available in Stainless Steel SS 316Tl or Hastelloy C-4.

	>> brochure		High Pressure Reactor BR-100 - the "Handy One" The high pressure reactor is available in Stainless Steel SS 316Tl, Hastelloy C-4, or Stainless Steel SS 316Tl with a PTFE lining closed on all sides. The reactor is locked with a quick-lock chain that is manually applied, without the need for tools. The reactor is sealed by means of a conical flange lock and an O-ring made of PTFE, Viton®, or Kalrez®. The matching fittings sets are available in Stainless Steel SS 316Tl or in Hastelloy C-4.

	>> brochure		High Pressure Reactor BR-300 - the "Universal One" The high pressure reactor is available in Stainless Steel SS 316Tl, Hastelloy C-4, or Stainless Steel SS 316Tl with a PTFE lining closed on all sides. The reactor is locked with a quick-lock clamp that is manually applied, without the need for tools. The reactor is sealed by means of a conical flange lock and an O-ring made of PTFE, Viton® or Kalrez®. The matching fittings sets are available in Stainless Steel SS 316Tl or in Hastelloy C-4.

	>> brochure		High Pressure Reactor BR-1000 - the "Big One" The high pressure reactor is available in Stainless Steel SS 316Tl, Hastelloy C-4 or Stainless Steel SS 316Tl with a PTFE lining closed on all sides. The reactor is locked with a quick-lock chain that is manually applied, without the need for tools. The reactor is sealed by means of a conical flange lock and an O-ring made of PTFE, Viton® or Kalrez®. The matching fittings sets are available in Stainless Steel SS 316Tl or in Hastelloy C-4.

HR HIGH PRESSURE REACTORS
o
	>> brochure		High pressure reactor HR-100 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping ring for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 180 ml, 100 bar, 230°C. Accessories Simple heating and stirring using a laboratory heating plate with heater block.

	>> brochure		High pressure reactor, HR-200 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping ring for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 315 ml, 150 bar, 230°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Simple heating and stirring using a laboratory heating plate with heater block.

	HR-500 >> brochure		High pressure reactor, HR-500 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping ring for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 600 ml, 200 bar, 230°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Simple heating and stirring using a laboratory heating plate with heater block.

	HR-700 >> brochure		High pressure reactor, HR-700 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping ring for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 180 ml, 100 bar, 230°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Gland-free stirring providing 25 Nm of torque. Heating via electric heating jacket or thermostatically regulated jacket.

	>> brochure		High pressure reactor, HR-1000 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping ring for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 1200 ml, 200 bar, 230°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Gland-free stirring providing 25 Nm of torque. Heating via electric heating jacket or thermostatically regulated jacket.

	>> brochure		High pressure reactor, HR-3000 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping chain for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Interior cooling or heating coil with PTFE jacket. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 4000 ml, 150 bar, 200°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Can be mounted on lab carts with integrated electric heating jacket. Gland-free stirring providing 25 Nm of torque.

	>> brochure		High pressure reactor, HR-4000 Description Pressure vessel made of high-alloy, SS 316 TI stainless steel with PTFE lining, fully enclosed and not merely coated. Rupture disc to reliably limit maximum pressure. Autoclave equipped with clamping chain for tool-free opening and closing. Fittings available in either SS 316 TI stainless steel or Hastelloy C4. Interior cooling or heating coil with PTFE jacket. Each autoclave is TÜV certified. Options Liquid and/or gas sample extraction device. Available without PTFE lining for 5400 ml, 150 bar, 200°C. Liquid injection (5 - 50 ml) under operating pressure. Accessories Can be mounted on lab carts with integrated electric heating jacket. Gland-free stirring providing 25 Nm of torque.